Label Maker Rotary Tape Writer

Label maker tools are convenient for crafting labels that are applicable in so many things. When you need to do some labeling, and you want to be more artistic, try the Label Maker Rotary Tape Writer.

A Punch-It Writer

This label maker is easy to use. It already comes with a thin black tape where you can punch the white letters to create basic labels. This rotary wheel tool has letters in all caps that you can choose just by turning the wheel and setting it at the pointer. The pointer is that protrusion at the top of the handle where the wheel is.

How To Place The Tape

• Remove the black tape from the pack and place it on the plastic dispenser. Make sure that the sticky side of the tape is facing the back.
• You will need to remove the wheel to put the end of the tape further past the wheel to the left-hand side. To remove the wheel, push the black button at the back to release the central button. Pop it off and remove the black wheel.
• A white wheel appears from the back end. Take it off also. Just slide the tape at the rear bottom of the pointer in front of the white part.
• Place the white wheel back then the black after, taking care that they are correctly aligned.

How To Label The Tape

• Turn the black wheel. If you need the letter ‘A,’ make sure that the pointer below is pointing at it.
• Press the handle two times. The letter will imprint on the tape on the second click. Per every print, make sure to pull the tape to the left a little so it won’t imprint on the same space.
• Do this with the rest of the letters.
• Imprinting the messages may be tedious work, but it will teach you to be patient and careful because mistakes cannot be erased. Do not be hasty so you won’t run out of tape.