Network Cable Tester LCD Screen

Make sure you’re getting the best out of your network connections with this Network Cable Tester LCD Screen! If you don’t know what a network cable tester is, it’s a device that verifies electrical connections in a cable. In short, it identifies if there are any problems in your signal that hinders it from performing. This product comes with 8 pieces of remotes and it also has an LCD screen. The advantage of having a screen is that you can read the measurements. Analog devices are not ideal for beginners because it can be challenging to use and lead to inaccuracies.

Functions

This cable tester tests PoE or PING testing. It also traces a specific target cable among the unknowns. The device locates faults for RJ11, RJ45, and BNC cables and also measures cable length. It has a function that detects voltage and also a storage function. You can export the data from your tester to a PC. Its largest distances for wire map, tracing and cable length are 2000m, 2000m, and 1000m, . As for the calibration, its minimum distance is 10m. It has an accuracy of 3%. The power source of the device is a built-in 3.7V and 1800 mAh lithium battery.

Specifications

This network cable tester has a currency detection and an automatic delay function for on and off switches. It has a low voltage alarm function. Its working temperature and working humidity are 0 to 60°C and 0 to 70°C, respectively. For the receiver, its type of cable is less than 2 cores. The device itself has an ergonomic design where each button for every function is accessible. It also has many ports for your convenience such as for TF cards and CHG. Finally, the receive has many LED indicators that state the statuses of its power, charging, and other functions.